RAID 5 is known as one of the most secure Raid configurations. There will be a minimum of three hard disk drives (HDD) in the RAID 5 array. In case, one drive fails, still, the system can work properly.
However, the capacity can be deduced to a certain level. But, in case, two drives fail simultaneously, then RAID 5 data recovery service becomes essential.
Two hard drives can fail together if they are attached to a faulty or damaged bus. Generally, there is a particular event that causes one drive to fall. These same events cause another drive to fail simultaneously.
However, you always seek help from proficient experts who are willing to provide you with requisite RAID 5 Data Recovery service.
Root Causes of RAID 5 Loss
Here, we have listed the common causes for the RAID 5 data loss. So, that you can take precautions for the next time:
- Hardware Conflicts
- RAID Controller Failure
- Accidental Formatting
- Mismatch RAID Configuration
- Rebuild Errors
- Incorrect Drive marketing
How To Recover from the RAID 5 Failure?
If you see a warning message or experience unexpected data loss on the system, then what you should do is to instantly power off your system and follow the steps provided below.
Don’t Restart
You are advised to just turn off your computer/ server and the array. However, don’t reboot as the rebooting can lead to some serious damages. In case, you hear an unusual noise from the driver, it means the system is damaged physically.
Don’t Run Volume Repair over the Damaged Driver
Utilities, like ‘chkdsk’,’ Scandisk’, are particularly designed to fix the common problems associated with the file system. However, these commands are not used for RAID 5 data restoration. These commands can move and write a lot of data and can lead to a worse situation.
Highlight the Failed Driver
When you lose your important data, don’t panic and to fix the problem. You might mix up all the drivers and forget which driver is actually faulty. Recovering the lost data can be highly stressful. However, if you are unable to determine the faulty disk, the tasks can be more difficult. Hence, you are suggested to mark the damaged driver.
Maintain the Order of the Driver in the Array
If you change the order of the drive in the RAID array, the situation can be more dangerous. Before inserting a new disk, you have to ensure that, the disk is totally zeroed. Also, it is compulsory to follow the manufacturer’s guidelines. Hence, it is highly recommended not to perform this task on your own and take expert help.
Reach Us. Enhance the Success Rate of the RAID 5 Data Recovery
With expert help, you can easily improve the performance rate of the RAID 5.
Do not Rebuild
If you are trying to rebuild the RAID 5 on your own, then you might enter the incorrect RAID array parameter. The simplest way to deal with it is to work with experts. For this purpose, you can get in touch with the experts of RAID 5 data recovery service Dubai.
Don’t Repair
In order to recover the data on your own, don’ t ever try to repair the cracked disks. Data restoration from the damaged RAID 5 driver needs expert guidance. Hence, you are advised to contact the expert.
As soon as you notice symptoms of data loss or RAID 5 service failure, immediately join with RAID 5 data recovery service Dubai in order to prevent further damages. Our team can assist you to prevent permanent data loss.
